Differences

This shows you the differences between two versions of the page.

--- fisher_acumet [2020/08/04 02:43] – [Reference Documentation] furst
+++ fisher_acumet [2023/01/05 22:59] – [About] haley
@@ Line 2: / Line 2: @@
-^             Fisher Acumet AB15 pH Meter                               ^
+^             pH Meter                               ^
 |      {{ :tools:fisheracumet:fisher_acumet.jpg?nolink&200 |}}          |
-| **Tool Type:**                  "TEXT HERE"                           |
+| **Tool Type:**                  Measurement                           |
-| **Location:**                   "TEXT HERE"                           |
+| **Location:**                   Microfluidics Lab                          |
-|  **Supervisor**        |  **Tool Lead**  |
+| **Description:**                pH meter                           |
-|  David Bothman         |  "WW Name"  |
+| **Manufacturer:**               Fisher Scientific                          |
-|  (805) 893-4125        |  (###) ###-####  |
-|  bothman@cnsi.ucsb.edu  |  "WW Email"  |
-| **Description:**                "TEXT HERE"                           |
-| **Manufacturer:**               "TEXT HERE"                           |
 ----
 ===== About =====
+This pH meter allows you to measure pH, absolute mV, relative mV or temperature, select one of three sets of standard buffer groups, and standardize with up to 5/6 buffers.
-Insert Text Here!
+----
+===== Safety Concerns =====
+"Proper electrode care is fundamental to obtaining reliable pH
+measurements. Improper care of the electrode may cause the
+meter reading to drift, respond slowly, or produce erroneous
+readings. For this reason, the electrode should always be
+conditioned and used in accordance with manufacturer’s
+instructions."
 ----
-===== Detailed Specifications =====
+===== Operating Procedures =====
+  - Connect electrode arm to the base
+  - Connect power cable to outlet
+  - Remove protective cover from electrode
+  - Before first use of a glass electrode, soak it for 2-4 hours in an electrode storage solution, pH 4 buffer, or KCI solution
+  - Remove the shortening cap from input 1 to connect the combination pH electrode. If a combination electrode isn’t used, connect the indicating pH electrode. Plug the reference electrode into ref 1. Also, install the ATC probe into the ATC 1.
+  - Rinse and blot-dry (don’t wipe) electrodes between each measurement using  DI water.
+  - Between measurements, store conventional pH electrodes in storage solution, pH 4 buffer, or KCI solution. Always leave the filling hole of liquid filled and combination electrodes open. Refill when the level of solution gets below the manufacturer’s recommended level.
-Insert Text Here!
-----
-===== Safety Concerns =====
+===== Detailed Specifications =====
-Insert Text Here!
+Relative accuracy: ±0.01
+Range: -1.99 to 19.99
-----
+-----
-===== Operating Procedures =====
-Insert Text Here!
-----
 ===== Reference Documentation =====
@@ Line 49: / Line 54: @@
 ------
-===== Training Documentation =====
-Insert Text Here!
-----