Microfluidics Lab and Innovation Workshop Wiki

User Tools

Site Tools

Trace:
carbide_3d_nomad_883_training_sop

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Next revisionBoth sides next revision
carbide_3d_nomad_883_training_sop [2020/09/08 19:58] – furstcarbide_3d_nomad_883_training_sop [2020/09/08 20:01] – [Choosing tools] furst
Line 90: Line 90:
     - Cutting/retract heights     - Cutting/retract heights
       - Typically selecting machining geometry will set many of the heights automatically, however they can all be altered if necessary       - Typically selecting machining geometry will set many of the heights automatically, however they can all be altered if necessary
-    - Machining passes  +    - Machining passes  \\ {{:tools:carbidecncrouter:stock_jto_leave.png?200|}}
- {{:tools:carbidecncrouter:stock_jto_leave.png?200|}}+
       - Part of feeds and speeds, HSM Works will auto fill many of the boxes, however due to the limited power and rigidity of the machine, stepdowns should be reduced based on the reference material and "multiple passes" should be used to reduce cutter load       - Part of feeds and speeds, HSM Works will auto fill many of the boxes, however due to the limited power and rigidity of the machine, stepdowns should be reduced based on the reference material and "multiple passes" should be used to reduce cutter load
       - "Material to leave" can be adjusted to create roughing passes if desired. Many operations such as adaptive clearing will automatically leave stock as it is assumed to be roughing operations.       - "Material to leave" can be adjusted to create roughing passes if desired. Many operations such as adaptive clearing will automatically leave stock as it is assumed to be roughing operations.
Line 133: Line 132:
 ====Choosing tools==== ====Choosing tools====
 Many tools are optimized for different materials, and although a 2 flute endmill can do most operations, it is not always ideal. Single and duel high helix endmills are available for plastics, woods, and composits, with carbide endmills and burs available for abrasive materials such as glass fiber reinforced materials such as circuit boards.  Many tools are optimized for different materials, and although a 2 flute endmill can do most operations, it is not always ideal. Single and duel high helix endmills are available for plastics, woods, and composits, with carbide endmills and burs available for abrasive materials such as glass fiber reinforced materials such as circuit boards. 
-feeds and speeds can be found {{:tools:carbidecncrouter:nomad_feeds_and_speeds.pdf|here}}+Feeds and speeds can be found {{:tools:carbidecncrouter:nomad_feeds_and_speeds.pdf|here}}
  
 ====File Types==== ====File Types====
carbide_3d_nomad_883_training_sop.txt · Last modified: 2020/09/13 21:47 by furst