Microfluidics Lab and Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Thinky ARE-310 Mixer ======

^                         Thinky Mixer                          ^
|         {{ :tools:thinkymixer:thinky_mixer.jpg?nolink&200 |}}         |
| **Tool Type:**                  PDMS                           |
| **Location:**                   Microfluidics Lab                           |



| **Description:**                PDMS mixing tool                           |
| **Manufacturer:**               Thinky                           |

Last updated 9/13/22 Haley
----

===== About =====
The Thinky Mixer is one of the PDMS tools in the Microfluidics lab. This machine is used for mixing and
de-aerating the elastomers that are used in fabrication of microfluidic devices. The mixing time and
revolution speed of the device can be programmed using the machine’s controller interface.

----

===== Safety Concerns =====

Goggles, gloves, a lab coat, long pants, and close-toed shoes should be worn while operating this machine. Long hair should be tied back. Review Sylgard 184 resin SOP before handling. 

----

===== Training Documentation =====

{{ :tools:thinkymixer:thinky_are-310_mixer_programming_handout.pdf |}}

----

===== Detailed Specifications =====

  * 310g capacity
  * Centrifugal force of over 400G
  * Cold-insulated, heat-resistant adapter enables support of various material characteristics
  * Memory and step-operation functions for controlling and executing operating condition
  * 2 modes of mixing and deaeration achieve dispersion and deaeration of high-viscosity materials in a small amount of time

----

===== Reference Documentation =====
{{:tools:thinkymixer:thinky_are-310_mixer_manual.pdf|}}

[[https://www.youtube.com/watch?v=7lsAd9Uu_vA&feature=youtu.be|Using the Thinky Mixer (video)]]

-----