Microfluidics Lab and Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
======Lindberg Blue M Convection Oven======

^                          Convection Oven                               ^
|       {{:convectionoven.jpg?200|}}           |                                                 
| **Tool Type:**                  Oven                   |
| **Location:**                   Microfluidics Lab                   |



| **Description:**                Mechanical Convection Oven                           |
| **Manufacturer:**               Lindberg / Blue M                          |


Last updated 1/5/23 Haley
----

===== About =====

Mechanical convection ovens utilize a motorized fan to create a consistent distribution of flowing air that allows for quick and uniform heating.

----

 
===== Safety Concerns =====
  * High Voltage
  * High Temperature
  * No combustibles or hazardous materials
  * Thermally insulating gloves must be worn when working with hot items. They can usually be found on the bench next to the ovens.
  * No food may be placed in laboratory ovens. 
  * Never heat a sealed container. 
  * Do not operate the oven if it is damaged, or is not working properly. Please place a note on the oven to alert other users, and notify laboratory staff of the problem. 
  * **Double containment is required for heating containers of liquid to prevent leaked material from contaminating the oven. This is especially true when heating PDMS molds.
**


----












===== Operating Procedures =====
  - Enter the set point temperature (see instructions for the different controllers below)
  - Place your items in the oven. Remember to place liquid materials on a baking sheet or other secondary container.
  - Set the countdown timer for the length of your run. If the timer reads zero time remaining another user who needs to use the oven may remove your items.
  - Remove your items from the oven and close the door.
  - The oven is left powered on.


__Changing the oven set point__

  - Use the ↑↓ to adjust the temperature
  - Press the SET/ENT button

__Setting the countdown timers__

  - Press 1
  - Enter the run time (HMS buttons)
  - Press 1 to start the countdown
  - Press and hold 1 to reset

----
===== Detailed Specifications =====

Temperature range: 0C-300C

----

===== Reference Documentation =====

[[lab-oven-SOP|Laboratory Oven SOP]]

{{ :tools:lindberg:lindberg_MO1430A.pdf | Operations Manual }}


----