WEN vertical Drill Press

This vertical drill press is one of the largest upright tools in the Innovations Workshop. It has a speed control lever on the left side of the head, and a vertical quill feed on the right. The chuck key is located on the right side of the head and should be replaced after use to avoid mixing chuck keys.

• Safety glasses, closed toe shoes, and long pants must be warn when operating the machine
• Metal chips can be incredibly sharp, do not touch any chips directly instead using an acid brush to remove chips
• Do not inhale any fumes resulting from drilling using oil
• Do NOT wear gloves during operation of machine
• Do not touch tool or spindle until the machine has stopped completely

Drill Press SOP

• Spindle Speed Range: 280-3,100 RPM (740-3,100 on main pulley)
• Quill extension length: 4 3/8“
• Max Drill Bit Diameter:16 mm
• Max Work piece Height: 44”

coe_student_machine_shop_safety_handout.pdf
coe_drill_press_sop.docx