====== Ultimaker 3 Extended/S5 Dual FDM 3D Printer ======
Last updated: 5/31/23 Haley

^            Ultimaker 3/S5                  ^
|                    {{:tools:ultimaker3:ultimaker3.jpg?150|}}          |
| **Tool Type:**                  3D printer                           |
| **Location:**                   Innovation Workshop                           |


| **Description:**                Duel extrusion FDM 3D printer                           |
| **Manufacturer:**               Ultimaker                          |

----

===== About =====

The Ultimaker 3 Extended & Ultimaker S5 are filament fed fusion deposition 3D printers capable of simultaneously printing two different plastics at once. Typically the printer is set up with ABS as a build material, and PVA as a solvable support material.  
----

===== Safety Concerns =====

  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.

----

=====Training Documentation=====

[[ultimaker_3_sop|FDM Training SOP]]


-----

===== Detailed Specifications =====
Ultimaker 3 Extended: \\
  *Build Volume: 215x215x300 mm  for right or left nozzle, 197x215x300 mm for dual material
  *Filament diameter: 2.85 mm\\ 
  *XYZ resolution: 12.5, 12.5, 2.5 microns \\ 
  *Build plate temperature: 20-100 °C\\ 
  *Nozzle temperature: 180-280 ºC 

Ultimaker S5: \\
  * Build Volume: 330x240x300 mm 
  * Filament diameter: 2.85 mm\\
  * XYZ resolution: 6.9, 6.9, 2.5 micron
  * Build plate temperature: 20-140 °C
  * Nozzle Temperature: 180-280 °C

-----

===== Reference Documentation =====

PVA Temps:\\ 
Extruder: 220 C
Bed: Whatever structural filament recommends 

ABS Temps:\\ 
Extruder: 230 C
Bed: 100 C

{{ :a700000006509368.pdf |ultimaker s5 specs}}\\
{{:tools:ultimaker3:ultimaker_3_extended_specifications.pdf|ultimaker 3 extended specs}}\\ 
{{:tools:ultimaker3:quick_start_guide_ultimaker_3_v3.2.pdf|Quick start guide}}\\ 
{{:tools:ultimaker3:um180129_ultimaker_3_manual_rb_v12_english.pdf|}}\\ 
[[https://support.ultimaker.com/hc/en-us/articles/360012007119]]\\
{{:tools:ultimaker3:pva_drying_recipe.pdf|}}\\
{{:tools:ultimaker3:ultimaker_filaments_-_sheet1.pdf|}} \\
{{:tools:ultimaker3:failed_3d_print_procedure.pdf|}}

-----