====== Thunder Laser Nova 35 100W Laser Cutter======


^             Nova35 100W                                          ^
|         {{ :tools:trotecspeedy:trotec_speedy.jpg?nolink&200 |}}            |
| **Tool Type:**                  Laser cutter                                |
| **Location:**                   Elings 3430                                |


| **Description:**                Laser cutter and engraver                           |
| **Manufacturer:**               ThunderLaser USA                         |

----

===== About =====

The Nova35 is a 100 Watt CO2 laser cutter with a 60cm x 90cm (23.6” x 35.4”) bed. It requires training to use, as well as an FBS reservation. Three different cutting heads are available for use: The standard 2” head for most applications, a 4” head for cutting materials thicker than 10mm (0.4”), and a high resolution head for cutting & engraving the finest features. [[https://www.thunderlaser.com/video/different-laser-heads-of-thunderlaser-system/ | More info about laser cutter head selection and installation here.]]

This laser cutter uses a software package called Lightburn for both layout and cutting. Through this software, you can control almost every aspect of the laser cutter. These instructions will help you perform a basic cut or engraving. For additional information,[[https://docs.lightburnsoftware.com/latest/ | please look through the Official Lightburn Documentation.]]


----

===== Safety Concerns =====

This machine uses a class 4 carbon dioxide (CO2) laser that emits intense and invisible laser radiation. Without safety precautions the direct radiation or even diffuse reflected radiation is dangerous! 
  * NEVER leave the laser machine alone when running a job. If you do need to leave, make sure there is someone else nearby who is aware that it is on and cutting.
  * The machine door must be left open while you are away.
  * Do not store any flammable materials in the inside of the device or in the immediate vicinity of the device.
  * Remove leftovers of previously produced materials before running a job.
  * A fire extinguisher/fire blanket must always be handy as the laser beam can ignite flammable materials. 
  * Metals, particularly un-coated aluminum, copper in particular, silver and gold, cannot be processed with the laser and lead to high reflections of the laser beam. 
  * Before processing materials the user must verify whether harmful materials can be generated and whether the filter equipment of the exhaust system is suitable for the harmful materials.
  * PVC (polyvinyl chloride) must under no circumstances be processed with the laser.
  * Looking directly into the laser can cause retinal damage. 
  * Confirm that the fume collection system is running whenever the laser is cutting or engraving. 
  * Ensure that the air-assist is working properly before firing the laser. If the air assist is malfunctioning, the laser cannot be safely operated.

----


===== Training Documentation =====

[[Laser Cutter Training SOP]]

----

===== Detailed Specifications =====
  * Working area (W x D): 90 cm x 60 cm or 35.4" x 23.6"
  * Max. height of workpiece : 230 mm or 9"
  * Overall dimensions (W x D x H): 1500 x 1105 x 1040 mm or 59.1" x 43.5" 40.9"
  * CO2 Laser power: up to 100W
  * Laser class:4
  * Weight: 310 kg or 680 lb
  * Power consumption: 1 ~ AC 110-230V 50/60Hz, 1.3 kW (60 watts)
  * Resolution: 500 DPI standard, 1000 DPI with High-Res head

----


===== Reference Documentation =====

{{:tools:trotecspeedy:marking_tape_notes.pdf|Marking Tape/Paint}} \\
{{:wiki:sop_s:methylene_chloride_sop.pdf|Bonding Acrylic with Methylene Chloride}} \\
Add Nova35 Manual \\

[[Laser cutting data]]