====== Ozone Cleaner Training SOP ======
Haley Holcomb 8/26/22
===== Location =====
The ozone cleaner is located inside the fume hood closest to the Objet printer in the Microfluidics Lab in Elings Hall 3430. 
===== Safety =====
  * Check with lab staff before using the chamber for anything besides bonding PDMS to glass.
  * Make sure the chamber is sealed before use.,
  * Ozone is a heath hazard - use inside fume hood.
  * Never dissemble or modify this unit.
===== Operating Procedures =====
  - Place substrates on platform in chamber,
  - Check the height of the substrates using the green tape on the ruler - Do not skip this step. A UV bulb is easily broken and costs $3,000.
  - Close the chamber lid.
  - Turn on the UV lamps by hitting the start switch.
  - Remove your substrates after the 10 minute timer is up.
  - Clean the chamber platform if necessary.