======Bambu Lab H2D 3D Printer======

^                 H2D                       ^
|              {{ :h2d-product-page-2.png?400 |}}                |                                  
| **Tool Type:**                  3D printer                    |
| **Location:**                   uFL 3430           |



| **Description:**                FDM 3D printer                |
| **Manufacturer:**               Bambu Lab                     |

----

======About======
The Bambu Lab H2D is located in Elings 3430 besides the X1Cs. It is an FDM printer which extrudes melted filament onto a textured build plate. Currently, it uses ABS, PLA, PETG, and TPU; all in a very limited variety of colors. It's one of our fastest printers while still maintaining a high quality.

------
======Detailed Specifications======
Nozzle tip sizes: 0.2 mm nozzle, 0.4 mm nozzle, 0.6 mm nozzle \\
Single Nozzle Build volume: 325 mm x 320 mm x 325mm \\
Dual Nozzle Build volume: 300 mm x 320 mm x 325mm \\
X,Y accuracy: ~200 microns
Max Nozzle Temp: 350 C
Max Heatbed Temp: 120 C
Max Chamber Temp: 65 C
------

======Training Documents======

[[h2d_sop|H2D SOP]]

------

======Reference Documentation======

[[https://bambulab.com/en-us/h2d|Product Overview]]\\
[[https://bambulab.com/en-us/h2d/tech-specs|Product Specs]]

------