Microfluidics Lab and Innovation Workshop Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Stratsys F270 FDM 3D Printer ======


^                F270                          ^
|                      {{:tools:stratasysf270:stratasysf270.jpeg?200|}}                 |
| **Tool Type:**                  3D printer                           |
| **Location:**                   Innovation Workshop                           |


| **Description:**                Enclosed duel extrusion FDM 3D printer                           |
| **Manufacturer:**               Stratasys                           |

----

===== About =====

The F270 is a fast and precise filament fed fusion deposition printer. It is typically set up with ABS and a soluble filament that is dissolved in a heated caustic bath. 
----


===== Safety Concerns =====

  * The print heads can be very hot - do not touch them with bare hands unless positive they are cool.
  * As with any automated machinery make sure that your body is clear of the moving parts to avoid injury.
  * The support removal tank for the F270 is filled with heated caustic chemicals that dissolve the support material. An apron, gloves, and a face shield must be worn when inserting and removing parts or basket from tank.

----

===== Training Documentation =====

[[ultimaker_3_sop|FDM Training SOP]]

----

===== Post-Processing =====

[[sca_naoh_bath|SCA 1200 HT NaOH parts bath]]

----

===== Detailed Specifications =====

Build area: 308 x 254 x 308 mm \\
Dual extrusion 3D printer (build and support material) \\
capable of printing PLA, ABS, ASA, QSR \\
.254 mm min layer thickness \\
XY tolerance of +/- .200 mm \\
4 spool bay \\

----

===== Reference Documentation =====
{{:tools:stratasysf270:notes_on_post_processing_f270_parts.pdf|Notes on Post Processing}}

{{:tools:stratasysf270:failed_3d_print_procedure.pdf|Failed 3D print Procedure}}

{{:tools:stratasysf270:bp_fdm_supportremoval.pdf|FDM Support Removal}}

{{:tools:stratasysf270:f123_series_operation_and_maintenance_rev_a.pdf|Operation and Maintenance rev. A}}

{{:tools:stratasysf270:sds_ecoworks_msds.pdf| Ecoworks filament MSDS }}

{{:tools:stratasysf270:stratasys_f123_series_user_manual_.pdf| User Manual }}


[[https://help.grabcad.com/category/193-tips-guides-and-faqs|GrabCAD Tips, Guides, and FAQs]]


[[https://www.youtube.com/watch?v=LFdPajgFTDk|Changing F270 fillament]]

[[https://www.youtube.com/watch?v=t8KyZYLnGIk|
Printing using the F270]]



-----